Used in both fluid and gaseous applications. Working pressures to 3000 PSI. Temperature range from 100 degrees F to 500 degrees F. Available in both non-conductive and conductive core TFE® (for static electrical dissipation). Used in automotive, food processing, pharmaceutical, and chemical systems, Teflon® is compatible with many chemical and caustic agents. Also available with extruded Hytrel, Santoprene, and Silicone covers in minimum run quantities. Standard in nominal sizes from 3/16” to 1 1/4".
CONVOLUTED TEFLON HOSE
Offers greater flexibility than smooth bore TFE®. Widely used in chemical plants, food processing, pharmaceutical manufacturing, and pulp and paper processing. Working pressures to 1000 PSI. Temperature range from -65 degrees F to 400 degrees F. Available in both non-conductive and conductive cores (for static electrical dissipation). Standard sizes from 3/8” to 2”.
HIGH PRESSURE TEFLON HOSE
For both fluid and gaseous applications. Working pressures to 6000 PSI. Suitable for applications using hot oils, phosphste ester based fluids, industrial gases and chemicals. Carbon black impregnated core for static electrical dissipation. Available with extruded Hytrel, Santropene, or Silicone cover in minimum run quantities. Nominal sizes from
1/4" to 1".
FLUOROCOMP HOSE
Smooth bore Teflon® core with an essentially non-flammable fiberglass cover. Composition is virtually inert to all chemicals. Widely used in CNG and alternative fuel applications. Working pressures to 800 PSI. Temperature range from -65 degree F to 400 degrees F. Available in nominal sizes from 1/4” to 1”.
TEFLON HOSE ENDS
Crimp and reuseable. Available in 300 series stainless steel, in a wide variety of configurations including female JIC swivel, male NPT, male and female O-ring Face Seal, Instrumentation, and Sanitary connections. Standard female JIC and male NPT are also available in brass.
CUSTOM CONFIGURATIONS AVAILABLE
TFS can fabricate custom configurations, including combination bent tube/Teflon® hose assemblies and special hose ends based on customer requirements and specifications.
